Description
Steer Axle Air Ride Upgrade Kit W/ Out Shocks Fits Peterbilt
- Steer Axle Air Ride Kit
- Double Air Bag Suspension System
- Kit Includes:
- (4) Double Convoluted Air Springs
- (4) Angle Brackets With Gussets
- (4) Discs
- Mounting Hardware
- Shock Absorber Not Included
- Factory Bolt Mount Is Not Included
- Fits Peterbilt 365 & 367 (2008 - 2024), 386 (2008 - 2016), 388 (2008 - 2014), 389 (2008 - 2025)
- Fits Above Models With Factory Air Ride Steer Axles Only
- Bolt-On Mount
- Sold As Kit
- Warning: Do Not Inflate Assembly When It Is Unrestricted. Assembly Must Be Restricted By Suspension Or Other Adequate Structure. Do Not Inflate Beyond 100 PSI. Improper Use Or Over-Inflation May Cause Assembly To Burst, Causing Property Damage And/Or Severe Personal Injury.
With A Load On Your Truck And The Air Springs Inflated, You Must Have At Least One Inch Clearance All Around The Air Bellows. For Best Ride Use Only Enough Air Pressure In The Air Springs To Level The Vehicle When Viewed From The Side. Inflate The Air Springs To Maintain This Height Under Any Conditions Of Load. Too Much Air Pressure In The Air Springs Will Result In A Stiffer Ride. Too Little Air Pressure Will Allow The Vehicle To Bottom Out And Not Provide The Improvement In Handling That Is Possible. To Prevent Possible Damage, Always Maintain A Minimum Of 2 PSI In The Load-Share Bellows.
- This Item Ships Direct From The Manufacturer And Will Arrive In A Separate Package And Possibly A Different Time Than The Balance Of Your Order
