Description
BESTfit 3.00 Inch ID Heavy Duty Silicone Coolant Hose
Do you need coolant hoses to withstand all of the elements your truck goes through? Elite Truck Accessoriescarries 3 inch ID x 3.32 inch OD Flexfab heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees fahrenheit, actual 200 PSI and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.
* High Quality Coolant Hose
* Made Of Silicone
* 3.00 Inch Inside Diameter - 76MM
* 3.32 Inch Outside Diameter - 84MM
* Silicone Hose With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 200 PSI
- SAEJ20R1 100 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
width="1293" height="300" />
