Description
Upgrade your coolant system with our Silicone Coolant Hose! This quality hose boasts a 2.00-inch inner diameter (51mm) and a 2.32-inch outer diameter (59mm), reinforced with three plies of polyester for added strength. Designed specifically for coolant applications, it meets or exceeds the operating requirements of SAE Class A and TMC RP303B, Class 1 Grade II standards. With a wide temperature range of -65?F to 350?F, it ensures reliable performance in various conditions. The hose has burst pressures of 250 PSI (actual), 200 PSI (SAEJ20R1), and 100 PSI (TMC). Sold per inch, with a maximum length of 36 inches (3 feet) per piece. For longer lengths or special orders, please contact our sales staff. Ensure accurate measurements before ordering, as cut pieces are not returnable. Upgrade your coolant system today with this aftermarket replacement part!
- Coolant Hose
- Made Of Silicone
- 2.00 Inch ID- 51MM
- 2.32 Inch OD - 59MM
- With 3 Plies Of Polyester Reinforcement
- For Coolant Applications Only
- Meets Or Exceeds The Operating Requirement Of SAE Class A
- Meets Or Exceeds The Operating Requirements Of TMC RP303B
- Class 1 Grade II
- Temperature Range -65 Degree To 350 Degee F
- Burst Pressures
- Actual 250 PSI
?- SAEJ20R1 200 PSI
?- TMC 100 PSI
- This Hose Is Sold Per Inch
The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
Aftermarket Replacement Part (Not OEM)
