Description
This silicone coolant hose is tough and perfect for keeping your engine cool. It's got a 1.75-inch inner diameter (that's 44mm) and a width of 2.07 inches (53mm), reinforced with three layers of polyester for strength. Designed specifically for coolant applications, it can handle temperatures from -65 to 350 degrees Fahrenheit. Plus, it meets or exceeds the requirements for SAE Class A and TMC RP303B Class 1 Grade II. It's strong too, with burst pressures up to 300 pounds per square inch. You can buy it by the inch, but the longest piece you can get in one go is 3 feet. If you need more, just ask for a special order. Remember to measure carefully before ordering, as cut pieces can't be returned. And though it's not the original part, it's just as reliable, if not better!
- Coolant Hose
- Made Of Silicone
- 1.75 Inch ID- 44MM
- 2.07 Inch OD - 53MM
- With 3 Plies Of Polyester Reinforcement
- For Coolant Applications Only
- Meets Or Exceeds The Operating Requirement Of SAE Class A
- Meets Or Exceeds The Operating Requirements Of TMC RP303B
- Class 1 Grade II
- Temperature Range -65 Degree To 350 Degee F
- Burst Pressures
- Actual 300 PSI
?- SAEJ20R1 225 PSI
?- TMC 125 PSI
This Hose Is Sold Per Inch
The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
Aftermarket Replacement Part (Not OEM)
