Description
Our strong coolant hose is made of tough silicone material, built to last and keep your engine cool. It's got a 1.25-inch hole in the middle (that's 32mm) and is about 1.57 inches wide (that's 40mm). It's got three layers of tough polyester inside to make it even stronger. This hose can handle hot and cold temperatures, from really cold to super hot, without any problems. It's strong enough to handle pressures up to 425 pounds per square inch (that's a lot!), so it won't burst easily. You can buy it by the inch, but the longest piece you can get in one go is 3 feet. If you need more than that, you'll have to ask for a special order. Just make sure you measure carefully before you order, because once it's cut, you can't send it back. And remember, this hose isn't the original one that came with your car, but it's just as good, if not better!
- High Quality Coolant Hose
- Made Of Silicone
- 1.25 Inch ID - 32MM
- 1.57 Inch OD - 40MM
- With 3 Plies Of Polyester Reinforcement
- For Coolant Applications Only
- Meets Or Exceeds The Operating Requirement Of SAE Class A
- Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
- Temperature Range -65 Degree To 350 Degee F
- Burst Pressures
- Actual 425 PSI
- SAEJ20R1 275 PSI
- TMC 125 PSI
This Hose Is Sold Per Inch
The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
Aftermarket Replacement Part (Not OEM)
