Description
BESTfit 0.375 Inch ID Heavy Duty Silicone Coolant Hose
Are you looking for coolant hose to withstand any temperature you may drive through? 4 State Trucks stocks 3/8 inch heavy duty silicone coolant hose specially designed for extreme temperatures and various pressure ranges where high performance levels are required. With a bend radius five times that of the inside diameter of the hose, this hose has a 1-ply of polyester reinforcement, made for coolant application use only, resists hardening, cracking, cold leaks, aging and many chemicals. The working pressure of this hose is a third of the burst pressure with an actual PSI of 310, SAEJ20R1 250 PSI, TMC 125 PSI, 0.375 inch inside diameter (10mm) and 0.071 inch outside diameter (18mm).
* High Quality Silicone Coolant Hose
* 0.375 Inch Inside Diameter - 10MM
* 0.071 Inch Outside Diameter - 18MM
* Silicone Hose With 1 Ply Of Polyester Reinforcement
* For Coolant Applications Only
* Meets or exceeds the operating requirements of SAE J20 R3 Class A
* Meets or exceeds the operating requirements of TMC RP303B Class I Grade II
* Temperature Range is ?65-Dg F / ?54?C to +350-Dg F / 177-Dg C
* Burst Pressures
- Actual 310 PSI
- SAEJ20R1 250 PSI
- TMC 125 PSI
* Sold Per Foot
* Working Pressure Is 1/3 of The Burst Pressure
* Bend Radius Is 5 Times the ID Of The Hose
* Continuous Lengths Are Not Guaranteed, If Continuous Lengths Are Required Please Contact Sales for Price and Availability
Resistant To Coolant Additives
* Resists Hardening, Cracking, Cold Leaks, Aging, And Many Chemicals
* Ideal For Extreme Temperature And Various Pressure Ranges Where High Performance Levels Are Required
* This Hose Is Sold Per Foot
* The Maximum Length Available in One Piece is 50 Feet
* Please Make Sure Measurements are Correct Before Ordering, Cut Pieces of Hose Are Not Returnable.
* Warranty on Coolant Hoses against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
width="1293" height="300" />
