Description
BESTfit Premium Heater Hose Nylon Fiber Reinforced
Do you have a project requiring 1/2 inch heater hose? 4 State Trucks has what you need including 1/2 inch silicone heater hose with 1-ply nylon fiber reinforcement with a thicker wall for higher pressure handling by comparison to standard heater hose. This hose is resistant to coolant additives, has a bend radius of five times of the inside diameter of the hose, working pressure is a 1/3 of the burst pressure with the actual burst pressure of 425 PSI and is sold by the foot. This hose has an inside diameter of 0.50 inches, outside diameter of 0.89 inches, resists hardening, cracking, cold leaks, aging and many chemicals. This high quality heater hose is sold by the foot with a green exterior lining, red inside lining, 0.226 lb/ft weight with a standard wall thickness of 0.170 inch.
* Made Of High Quality Silicone
* Silicone Hose With 1-Ply Of Nylon Fiber Reinforcement
* Thicker Wall For Higher Pressure Handling Than Standard Heater Hose
* Green Cover
* Red Liner
* Size
- 0.50 Inch Inside Diameter
- 0.89 Inch Outside Diameter
- 425 PSI - Actual Burst Pressure
- .0226 LB/FT Weight
* Meets Or Exceeds The Operating Requirements Of SAE J20 R3 Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class I Grade II
* Temperature Range Is - 65 Degree F to + 350 Degree F
* Standard Wall Thickness Is .170 Inch / .220 Inch
* Working Pressure Is 1/3 Of the Burst Pressure
* Bend Radius Is 5 Times The ID Of The Hose
* Resistant To Coolant Additives
* Resists Hardening, Cracking, Cold Leaks, Aging, And Many Chemicals
* Ideal For Extreme Temperature And Various Pressure Ranges Where High Performace Levels Are Required
* Sold By The Foot
* Warranty On Heater Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
width="1293" height="300" />
