Description
6 To 5 Inch Stack With Long Drop Elbows
Are you looking to replace an old exhaust? Stop searching, Elite Trucks Accessories and Lincoln Chrome have you covered. An exhaust that is damaged might have a leak which than can lead to decreased acceleration and power, increased fuel consumption, and it can cause engine noise that is not normal. With Lincoln Chrome, you get an option that is stylish, easy to install, dependable, and the premium performance that your truck would need. There are numerous customizable options for your preferences, so you get the cut and the length you want. Check out the rest of the Lincoln Chrome exhaust kits to find the best choice for your truck and you.
Fitment
* Fits Peterbilt 359 1967 thru 198
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 102 Inch Overall Height
- Kit Includes:
- (2) 6 x 48 Inch Flat Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 102 Inch
* 2 - 6 X 48 Inch Flat Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 102 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 102 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 102 Inch Overall Height
- Kit Includes:
- (2) 6 x 48 Inch Miter Cut Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 102 Inch
* 2 - 6 X 48 Inch Miter Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 102 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 102 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 102 Inch Overall Height
- Kit Includes:
- (2) 6 X 48 Inch Bull Hauler Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 102 Inch
* 2 - 6 X 48 Inch Bull Hauler Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 102 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 102 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 102 Inch Overall Height
- Kit Includes:
- (2) 6 x 48 Inch Short 30 Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 102 Inch
* 2 - 6 X 48 Inch Short 30 Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 102 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 102 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 102 Inch Overall Height
- Kit Includes:
- (2) 6 x 48 Inch Curve Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 102 Inch
* 2 - 6 X 48 Inch Curve Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 102 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 102 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 102 Inch Overall Height
- Kit Includes:
- (2) 6 x 48 Inch West Coast Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 102 Inch
* 2 - 6 X 48 Inch West Coast Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 102 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 102 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 48 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 102 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 108 Inch Overall Height
- Kit Includes:
- (2) 6 x 54 Inch Flat Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 108 Inch
* 2 - 6 X 54 Inch Flat Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 108 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 108 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 108 Inch Overall Height
- Kit Includes:
- (2) 6 x 54 Inch Miter Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 108 Inch
* 2 - 6 X 54 Inch Miter Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 108 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 108 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 108 Inch Overall Height
- Kit Includes:
- (2) 6 x 54 Inch Bull Hauler Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 108 Inch
* 2 - 6 X 54 Inch Bull Hauler Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 108 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 108 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 108 Inch Overall Height
- Kit Includes:
- (2) 6 x 54 Inch Short 30 Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 108 Inch
* 2 - 6 X 54 Inch Short 30 Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 108 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 108 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 108 Inch Overall Height
- Kit Includes:
- (2) 6 x 54 Inch Curve Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 108 Inch
* 2 - 6 X 54 Inch Curve Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 108 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 108 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 108 Inch Overall Height
- Kit Includes:
- (2) 6 x 54 Inch West Coast Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 108 Inch
* 2 - 6 X 54 Inch West Coast Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 108 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 108 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 54 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 108 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 114 Inch Overall Height
- Kit Includes:
- (2) 6 x 60 Inch Flat Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 114 Inch
* 2 - 6 X 60 Inch Flat Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 114 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 114 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 114 Inch Overall Height
- Kit Includes:
- (2) 6 x 60 Inch Miter Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 114 Inch
* 2 - 6 X 60 Inch Miter Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 114 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 114 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 114 Inch Overall Height
- Kit Includes:
- (2) 6 x 60 Inch Bull Hauler Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 114 Inch
* 2 - 6 X 60 Inch Bull Hauler Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 114 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 114 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 114 Inch Overall Height
- Kit Includes:
- (2) 6 x 60 Inch Short 30 Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 114 Inch
* 2 - 6 X 60 Inch Short 30 Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 114 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 114 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 114 Inch Overall Height
- Kit Includes:
- (2) 6 x 60 Inch Curve Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 114 Inch
* 2 - 6 X 60 Inch Curve Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 114 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 114 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 114 Inch Overall Height
- Kit Includes:
- (2) 6 x 60 Inch West Coast Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 114 Inch
* 2 - 6 X 60 Inch West Coast Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 114 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 114 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 60 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 114 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 118 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 64 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 118 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 68 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(2) 6 x 36 Inch Curved Turn Out Top Stack
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 36 Inch Curved Turn Out Top Stack
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(2) 6 x 36 Inch Curved Turn Out Top Stack
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 36 Inch Curved Turn Out Top Stack
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Chrome Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Chrome Plated Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 90 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 36 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 90 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 96 Inch Overall Height
- Kit Includes:
- (2) 6 x 44 Inch Flat Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 96 Inch
* 2 - 6 X 44 Inch Flat Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 96 Chrome Flat Top Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 96 Chrome Flat Top Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 96 Inch Overall Height
- Kit Includes:
- (2) 6 x 44 Inch Miter Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 96 Inch
* 2 - 6 X 44 Inch Miter Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 96 Chrome Miter Cut Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 96 Chrome Miter Cut Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 96 Inch Overall Height
- Kit Includes:
- (2) 6 x 44 Inch Bull Hauler Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 96 Inch
* 2 - 6 X 44 Inch Bull Hauler Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 96 Chrome Bull Hauler Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 96 Chrome Bull Hauler Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Bull Hauler Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 96 Inch Overall Height
- Kit Includes:
- (2) 6 x 44 Inch Short 30 Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 96 Inch
* 2 - 6 X 44 Inch Short 30 Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 96 Chrome Short 30 Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 96 Chrome Short 30 Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool, Long Drop Elbows & 5 Inch T Pipe
- Exhaust Kit- Made Of Chrome Plated Steel
- 96 Inch Overall Height
- Kit Includes:
- (2) 6 x 44 Inch Curve Top Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 96 Inch
* 2 - 6 X 44 Inch Curve Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 96 Chrome Curve Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
(4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
(1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
(1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
(1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
(1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 96 Chrome Curve Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(4) 6 Inch Angled Exhaust Clamp Bracket
(2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
(2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
(2) 6 x 44 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbow
- Exhaust Kit- Made Of Chrome Plated Steel
- 96 Inch Overall Height
- Kit Includes:
- (2) 6 x 44 Inch West Coast Stacks
- (2) 6 x 55 Inch Center Section Spools
- (2) 6 To 5 Inch Long Drop 90 Degree Elbows, 29 Inch Top Leg, 20 Inch Bottom Leg
- (1) Aluminized Steel Y-Pipe, 5 Inch ID/OD/OD
- (1) 5 Inch ID x 36 Inch Stainless Steel Flex Pipe
- (4) 5 Inch Stainless Steel Flat Band Clamps
- (4) Wide Angled Chrome Plated Stainless Steel Exhaust Clamps, 6 Inch ID, 3 Inch Width
- (1) High Temperature Silicone Sealant
- If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
- Made In USA
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With 55 Inch Spool & Long Drop 90 Degree Elbows
* Made Of High Quality Chrome-Plated Steel* Length 96 Inch
* 2 - 6 X 44 Inch West Coast Top Stacks
* 2 - 6 X 55 Inch Center Section - Spool
* 2 - 6 To 5 Inch Long Drop Elbows
* 4 - 6 Inch Angled Exhaust Clamp Brackets - Pipe To Cab
* 1 - High Temperature Silicone Sealant
* Bushings Not Included - Sold Separately
* If Truck Has Original 359 Cab Brackets, Bushings Will Not Fit
* Sold Individually
* Made In USA
* Warranty On Exhaust Kit Against Defects In Workmanship & Material From Date Of Purchase.
**This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
***High Quality Aftermarket Replacement Part (Not OEM)***
LC 6 X 96 Chrome West Coast Stack Kit W/ 6-5 LD 90-Deg Elbow, 55 Spool, 5" Alumzd Tee, Flex & W/ Out Cab Brackets
- Exhaust Kit- Includes:
- (1) High Temperature Silicone Sealant, 3 Ounce Tube
- (4) 6 Inch Angled Exhaust Clamp Bracket
- (2) 6 To 5 Inch 90 Degree Long Drop Elbow (29 Inch Tapered Top Leg, 20 Inch Bottom Leg)
- (4) 5 Inch Diameter Stainless Steel Pre-Formed Exhaust Band Clamp With Hardware
- (1) 5 Inch ID/OD/OD (2) 90 Degree Bend Y-Pipe With Divider Plate, Aluminized Steel, 25 Inch Width, 14 Inch Height
- (1) 5 Inch ID x 18 Inch 409 Stainless Steel Flex Pipe
- (1) 5 Inch ID x 24 Inch 409 Stainless Steel Flex Pipe
- (1) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
- (2) 6 x 44 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 96 Chrome West Coast Stack Kit W/ 6-6 LD 90-Deg Elbow, 55 Spool, W/ Out Tee & W/ Out Cab Brackets
- Exhaust Kit- Includes:
- (1) High Temperature Silicone Sealant, 3 Ounce Tube
- (4) 6 Inch Angled Exhaust Clamp Bracket
- (2) 6 Inch 90 Degree Elbow Long Drop (29 Inch Tapered Top Leg, 24 Inch Bottom Leg)
- (2) 6 x 55 Inch Center Section Spools With Tapered Top, Chrome Plated Steel
- (2) 6 x 44 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 96 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Additional Information
Finish Options: |
Chrome-Plated |
Height Options: |
118 Inch |
Location: |
Made In USA |
Style Options: |
Bull Hauler Turn |
Style Options: |
Long Drop |
Truck Class: |
Heavy Duty |
Material Options: |
Steel |
Style Options: |
Curve Turn |
Style Options: |
Miter Cut |
Cab Style: |
Non Unibuilt W/O Cab Brackets |
Height Options: |
102 Inch |
Height Options: |
120 Inch |
Diameter Options: |
6 Inch |
Height Options: |
114 Inch |
Height Options: |
96 Inch |
Product Type: |
Exhaust |
Style Options: |
Flat Top |
Style Options: |
West Coast Turn |
Degree Options: |
90 |
Height Options: |
108 Inch |
Height Options: |
90 Inch |
Position: |
Kit Full |
Style Options: |
Diablo Turn |
Style Options: |
Short 30 Turn |
Make: |
Peterbilt |
Availability: |
Ready To Ship |
