Description
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
Are you looking to replace an old exhaust? Stop looking, Elite Trucks Accessories and Lincoln Chrome have you covered. A properly working exhaust allows gases to be moved from your engine in an efficient way which has the ability to improve the performance including the acceleration of your engine and it could lessen your fuel consumption. With Lincoln Chrome, you get an option the brings some style, it is easy to install, it is dependable, and it has that premium performance that your truck would need. There are numerous customizable options for your preference, so you get the cut and the length you want. Check out the rest of the Lincoln Chrome exhaust kits to find the best choice for you.
Fitment
* Fits Kenworth W900A 1970 thru 1982
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 108 Inch Flat Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 108 Inch Miter Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 108 Inch Bull Hauler Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 108 Inch Short 30 Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 108 Inch Curve Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 108 Inch West Coast Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* High Quality Exhasut Kits* Kit Includes:
- (2) 6 X 114 Inch Flat Top Stacks
- (1) 6 To 5 Inch 0742 Elbow Driver Side
- (1) 6 To 5 Inch 0742 Elbow Passenger Side
- (2) 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
- (2) 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
- (1) High Temperature Silicone Sealant
* These Kits Are Installer-Friendly
* Made In USA
* Sold As Kit
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 114 Inch Miter Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 114 Inch Bull Hauler Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
2 - 6 Inch Lower Exhaust Clamp Brackets - Elbow To Frame Bracket
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 114 Inch Short 30 Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 114 Inch Curve Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 114 Inch West Coast Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
LC 6 X 120 Chrome Flat Top Exhaust Kit 1 Piece W/ 0742 6-5 Elbows For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 120 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Miter Stack Kit 1 Piece W/ 0742 6-5 Elbow For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 120 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Bull Hauler Stack Kit 1 Piece W/ 0742 6-5 Elbows, 52 Spool & No Tee
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 120 Inch Bullhorn Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Short 30 Stack Kit 1 Piece W/ 0742 6-5 Elbow For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 120 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome Curve Exhaust Kit 1 Piece W/ 0742 6-5 Elbows
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 120 Inch Curved Turn Out Top Stack
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 120 Chrome West Coast Stack Kit 1 Piece W/ 0742 6-5 Elbows For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 120 Inch West Coast Curved Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 120 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 72 Chrome Flat Top Exhaust Kit 1 Piece W/ 0742 6-5 Elbows For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 72 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 72 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 72 Chrome Miter Stack Kit 1 Piece W/ 0742 6-5 Elbow For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 72 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 72 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 72 Chrome Bull Hauler Stack Kit 1 Piece W/ 0742 6-5 Elbows & No Tee
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 72 Inch Bullhorn Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 72 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 72 Chrome Short 30 Stack Kit 1 Piece W/ 0742 6-5 Elbow For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 72 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 72 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 72 Chrome Curve Exhaust Kit 1 Piece W/ 0742 6-5 Elbows
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 72 Inch Curved Turn Out Top Stack
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 72 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 72 Chrome West Coast Stack Kit 1 Piece W/ 0742 6-5 Elbows For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 72 Inch West Coast Curved Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 72 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 84 Chrome Flat Top Exhaust Kit 1 Piece W/ 0742 6-5 Elbows For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 84 Inch Flat Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 84 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 84 Chrome Miter Stack Kit 1 Piece W/ 0742 6-5 Elbow For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 84 Inch Miter Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 84 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 84 Chrome Bull Hauler Stack Kit 1 Piece W/ 0742 6-5 Elbows & No Tee
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 84 Inch Bullhorn Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 84 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 84 Chrome Short 30 Stack Kit 1 Piece W/ 0742 6-5 Elbow For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 84 Inch Short 30 Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 84 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 84 Chrome Curve Exhaust Kit 1 Piece W/ 0742 6-5 Elbow
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 84 Inch Curved Turn Out Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 84 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
LC 6 X 84 Chrome West Coast Stack Kit 1 Piece W/ 0742 6-5 Elbows For Kenworth W900A Non-AeroCab
- Exhaust Kit- Includes:
(1) High Temperature Silicone Sealant, 3 Ounce Tube
(2) 6 Inch Diameter x 3 Inch Width Exhaust Clamp With 4 Bolt Holes, Chrome Plated Stainless Steel
(1) 6 To 5 Inch Multi Bend Driver Side Elbow, Chrome Plated Steel
(1) 6 To 5 Inch Multi Bend Passenger Side Elbow, Chrome Plated Steel
(2) 6 Inch Diameter x 3 Inch Width Stainless Steel Exhaust Clamp, Without Bracket
(2) 6 x 84 Inch West Coast Turnout Top Stack, Chrome Plated Steel
- Made Of Chrome Plated Steel
- Dimensions:
- 6 Inch Diameter
- 84 Inch Overall Height
- Sold As Kit
- Aftermarket Replacement Part (Not OEM)
- This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 96 Inch Flat Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 96 Inch Miter Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 96 Inch Bull Hauler Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 96 Inch Short 30 Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 96 Inch Curve Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Chrome 6 Inch Exhaust Kit With K180-10742 Elbows
* These Kits Are Installer-Friendly* Exhaust Kit Includes:
2 - 6 X 96 Inch West Coast Top Stacks
1 - 6 To 5 Inch 0742 Elbow Driver Side
1 - 6 To 5 Inch 0742 Elbow Passenger Side
2 - 6 Inch Upper Exhaust Clamp Brackets - Pipe To Cab
2 - 6 Inch Lower Exhaust Clamps - Pipe To Elbow Seam
1 - High Temperature Silicone Sealant
* Optional Exhaust Tee Pipe - Choose Your T-Pipe Option Size Or Without A Tee, If You Select Without A Tee, Your Kit Will Include Long Drop Elbows That Reduce To 5 Inch OD Inlet.
** Lower Angled Cab Bracket (2) - Included When Unibilt Is Selected At Sleeper Style, If You Select Non-Unibilt, Your Kit Will Not Include The Lower Cab Brackets.
** Clamps Full Band Style For Elbow To Tee (2) - Included When T-Pipe Option Is Selected, If You Select No Tee, Your Kit Will Not Include The Clamps For The Bottom Of The Elbows.
**Caution: The Center Stack Section Or Spool Will Need To Be Measured On 2004 Year Model Trucks Before Purchasing Exhaust Kits Because Of Mid-Year Changes. Measure Center To Center Of The Upper And Lower Mounting Points To Determine If You Need A 52 Or 55 Inch Spool and Then Select Your Size From The Drop Down For Spool Length.
* This Exhaust Kit Qualifies For Free Shipping To Any Commercial Address In The 48 Contiguous States. All Exhaust Kits Are Shipped Via Standard Truck Freight. Shipping To A Residence Or Farm Could Result In Shipping Costs Being Assessed.*
** Warranty On Exhaust Kits Against Defects In Workmanship & Material From Date Of Purchase **
*** High Quality Aftermarket Replacement Part (Not OEM) ***
Additional Information
Diameter Options: |
6 Inch |
Product Type: |
Exhaust |
Location: |
Made In USA |
Truck Class: |
Heavy Duty |
Make: |
Kenworth |
Cab Style: |
KW W900A |
Type Options: |
OE Style Elbows |
Material Options: |
Chrome-Plated Steel |
Style Options: |
1 Piece Stacks |
Ready To Ship: |
Yes |