Bestfit Heavy Duty Silicone Coolant Hose, Sold By Linear Inch

** Universal - Fits Multiple Makes & Models Of Trucks

BESTfit 2.25 Inch ID Heavy Duty Silicone Coolant Hose

Need to replace coolant hoses? Elite Truck Accessoriescarries 2.25 inch ID Flexfab heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees fahrenheit and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 2.50 Inch ID Heavy Duty Silicone Coolant Hose

In the market for replacement coolant hoses? Elite Truck Accessoriescarries 2.50 inch ID Flexfab heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees fahrenheit, actual 200 PSI and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 2.75 Inch ID Heavy Duty Silicone Coolant Hose

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 3.00 Inch ID Heavy Duty Silicone Coolant Hose

Do you need coolant hoses to withstand all of the elements your truck goes through? Elite Truck Accessoriescarries 3 inch ID x 3.32 inch OD Flexfab heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees fahrenheit, actual 200 PSI and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 2.00 Inch ID Heavy Duty Silicone Coolant Hose

Upgrade your coolant system with our Silicone Coolant Hose! This quality hose boasts a 2.00-inch inner diameter (51mm) and a 2.32-inch outer diameter (59mm), reinforced with three plies of polyester for added strength. Designed specifically for coolant applications, it meets or exceeds the operating requirements of SAE Class A and TMC RP303B, Class 1 Grade II standards. With a wide temperature range of -65?F to 350?F, it ensures reliable performance in various conditions. The hose has burst pressures of 250 PSI (actual), 200 PSI (SAEJ20R1), and 100 PSI (TMC). Sold per inch, with a maximum length of 36 inches (3 feet) per piece. For longer lengths or special orders, please contact our sales staff. Ensure accurate measurements before ordering, as cut pieces are not returnable. Upgrade your coolant system today with this aftermarket replacement part!

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 1.00 Inch ID Heavy Duty Silicone Coolant Hose

Do you have a need for 1 inch ID coolant hoses? Elite Truck Accessoriescarries Flexfab heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 450 PSI and burst pressures.

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 1.25 Inch ID Heavy Duty Silicone Coolant Hose

Our strong coolant hose is made of tough silicone material, built to last and keep your engine cool. It's got a 1.25-inch hole in the middle (that's 32mm) and is about 1.57 inches wide (that's 40mm). It's got three layers of tough polyester inside to make it even stronger. This hose can handle hot and cold temperatures, from really cold to super hot, without any problems. It's strong enough to handle pressures up to 425 pounds per square inch (that's a lot!), so it won't burst easily. You can buy it by the inch, but the longest piece you can get in one go is 3 feet. If you need more than that, you'll have to ask for a special order. Just make sure you measure carefully before you order, because once it's cut, you can't send it back. And remember, this hose isn't the original one that came with your car, but it's just as good, if not better!

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 1.50 Inch ID Heavy Duty Silicone Coolant Hose

This silicone coolant hose is sturdy and designed to keep your engine running smoothly. With a 1.50-inch inner diameter (that's 38mm) and a width of 1.82 inches (46mm), it's reinforced with three layers of tough polyester for extra durability. Perfect for coolant use, it can handle temperatures ranging from -65 to 350 degrees Fahrenheit. Plus, it meets or exceeds the requirements for SAE Class A and TMC RP303B Class 1 Grade II. It's strong too, with burst pressures up to 375 pounds per square inch. You can buy it by the inch, but the longest piece you can get in one go is 3 feet. If you need more, just ask for a special order. Remember to measure carefully before ordering, as cut pieces can't be returned. And though it's not the original part, it's just as reliable, if not better

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 1.75 Inch ID Heavy Duty Silicone Coolant Hose

This silicone coolant hose is tough and perfect for keeping your engine cool. It's got a 1.75-inch inner diameter (that's 44mm) and a width of 2.07 inches (53mm), reinforced with three layers of polyester for strength. Designed specifically for coolant applications, it can handle temperatures from -65 to 350 degrees Fahrenheit. Plus, it meets or exceeds the requirements for SAE Class A and TMC RP303B Class 1 Grade II. It's strong too, with burst pressures up to 300 pounds per square inch. You can buy it by the inch, but the longest piece you can get in one go is 3 feet. If you need more, just ask for a special order. Remember to measure carefully before ordering, as cut pieces can't be returned. And though it's not the original part, it's just as reliable, if not better!

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 3.25 Inch ID Heavy Duty Silicone Coolant Hose

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 3.50 Inch ID Heavy Duty Silicone Coolant Hose

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

BESTfit 3.75 Inch ID Heavy Duty Silicone Coolant Hose

- Aftermarket Replacement Part (Not OEM)

- Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.

- This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.