Peterbilt 362 CAC Clamps, Boots & Hoses

Maximize Fuel Economy and Horsepower with Leak-Proof CAC Seals

CAC clamps, boots, and hoses move cooled, pressurized air from the turbo to the engine. When those connections seal tight, your truck runs stronger, pulls cleaner, and wastes less fuel. A worn CAC boot or loose clamp leaks boost. You feel it right away. Slower acceleration. Weaker hill pulls. Higher fuel burn just to keep speed. That poor air-to-fuel mix also creates excess soot, which loads up the DPF faster and raises the risk of a derate. Oil is the most common failure trigger. Even a light turbo oil mist can soak silicone boots over time. The material softens. It swells. Then it splits under pressure. Replacing oil-soaked boots early prevents blown hoses and roadside breakdowns. Clamps matter just as much as the boots and hoses. Weak or stretched clamps let hoses slip under boost. That causes leaks and can allow dirty air to enter the intake. Dusting an engine leads to internal damage that no tune-up can fix. Heavy-duty CAC clamps keep everything locked down and sealed. Most problems show clear warning signs. You may hear a hiss or whistle under load. You may see oil residue around the boots or black smoke on acceleration. You may notice lower boost readings on the dash. Replacing CAC clamps, boots, and hoses is a practical repair that saves money over time. A quick install in the shop beats a blown boot and a tow call